Komli

Tuesday, October 6, 2009

Simple Line Follower Tutorial

Hiii Everyone, I am sorry for all the people who have been logging onto my blog as I haven't been updating a lot.

I would be explaining about making a line follower, using 3 and 2 sensors. I would also be telling the advantage of using 3 sensors over two sensors.

Prerequisites :

1) Have a sensor circuit ready. You can check my post to know how to make a sensor ckt.

2) Have microcontroller (I would be using atmega8). and a motor driver ready.

Setup of sensors:

Have the sensors setup on the chassis in such a way that center sensor is atleast 2cm away from left and right sensor.( Why 2cm you will know later).

Now the LOGIC part: Assuming that arena is white in colour and line is black in colour.

L C R Direction
1 0 1 Forward [ both motors move in same direction]
0 0 1 Left [ only right motor moves]
1 0 0 right [only left motor moves]
0 0 0 Forward. ( we have encountered a junction over here)


Code to be written :

#include
int L; //left sensor connected to 1st pin of Portc, which is PINC.0
int R;// right sensor connected to 2nd pin of Portc, Pinc.1
int C;// center sensor connected to 3rd pin of Portc, Pinc.2
main()
{

if(L==1&&C==0&&R==1)
{
PORTD=0xAA;
}
if(L==0&&C==0&&R==1)
{
PORTD=0x02;
}

if(L==1&&C==0&&R==1)
{
PORTD=0x88;
}

if(L==1&&C==0&&R==1)
{
PORTD=0xAA;
}

Motors are connected to PORTD pins.

When PORTD=0xAA;

AA stands in hex as 10101010 [ Most significant bit to least significant bit]

So the motor pins are connected as follows: Consider only the first four bits/pins, bcz we wont be using the last four bits/pins.

PIND.0= R-;
PIND.1= R+;
PIND.2=L-;
PIND.3=L+;

When R+,L+ are high. Both the motors would rotate in one direction.

When R+ is high, rest ground. Only the right motor would rotate.

Same thing for rest all.

I hope you did understand the code . I will be posting the ckt of it shortly.
If any queries please ask me.

2 comments:

Black Smith said...

Valuable information and excellent design you got here! I would like to thank you for sharing your thoughts and time into the stuff you post!! Thumbs up

Ophthalmology | Surgical instruments

Unknown said...

hey dude i have also a blog so can you check it. link:-http://robotics4u7108.blogspot.com